RouterBoard
Reset
- Power off
- Keep pressed the RESET button (or pin hole or whatever you have)
- Power on
- Wait until LED starts to blink
- Release the RESET button
If you don't release the RESET button until the LED stops flashing you will be starting the Netinstall mode
Default setup
- All boards default to IP address 192.168.88.1/24
- ether1 usually is running DHCP requests (so no IP) and it's mean as the WAN port.
- ether1/WAN usually runs as masqueraded port (SNAT)
- Runs DHCP server at all (switched) ports except ether1
- For WiFi they usually use the device serial number as its WPA Shared Key
- Default credentials ae user
admin
with empty password